: Open the Diagnostic Tool (e.g., version 1.028). Set the interface to USB and click Get Status . The indicator should turn green if the connection is active.
: Click Get to see the assigned IP address (the default is often 192.168.1.110 ). For long-term stability, it is recommended to set a Static IP in the configuration settings.
: Required for the initial configuration of network settings via USB. xprinter xp420b wifi setup
: Use the USB cable to connect the printer to your Windows PC and turn the printer on.
This is ideal for single-user scenarios or when a local router is unavailable. : Open the Diagnostic Tool (e
This mode allows multiple users on the same network to access the printer.
: Go to the Configuration Page or Wi-Fi tab. Click Scan to find available wireless networks. : Click Get to see the assigned IP
: Connected to power and loaded with label stock.
This service is not created, tested, or endorsed by Pimaco®. We use their template layouts solely to help you print your label designs online effortlessly - this use does not imply any affiliation with or endorsement by Pimaco®.
: Open the Diagnostic Tool (e.g., version 1.028). Set the interface to USB and click Get Status . The indicator should turn green if the connection is active.
: Click Get to see the assigned IP address (the default is often 192.168.1.110 ). For long-term stability, it is recommended to set a Static IP in the configuration settings.
: Required for the initial configuration of network settings via USB.
: Use the USB cable to connect the printer to your Windows PC and turn the printer on.
This is ideal for single-user scenarios or when a local router is unavailable.
This mode allows multiple users on the same network to access the printer.
: Go to the Configuration Page or Wi-Fi tab. Click Scan to find available wireless networks.
: Connected to power and loaded with label stock.
