6n Dashboard Removal Updated — Vw Polo

You cannot pull the dash out while the steering wheel and center console are in place.

Pop the center cap/airbag unit off (two bolts behind the wheel). Carefully disconnect the airbag wire. Use a 24mm socket to remove the center nut and pull the wheel off. vw polo 6n dashboard removal updated

Reach behind and ensure the speaker wires, clock wires, and airbag harness are all free. You cannot pull the dash out while the

Removing the dashboard from a Volkswagen Polo 6N (produced roughly between 1994 and 1999) is a significant undertaking. Whether you are replacing a leaking heater matrix, upgrading your interior, or fixing persistent rattles, this guide provides an updated, step-by-step approach to help you navigate the process safely. Preparation and Tools Use a 24mm socket to remove the center

Remove the screws located near the footwells and under the ashtray. Lift the gear gaiter and remove the surrounding trim to access hidden bolts. Pull the console back toward the rear seats. Step 3: Removing the Instrument Cluster and Switches

Pull the three rotary knobs off. Remove the screws behind them to loose the heater control panel. You do not necessarily need to disconnect the cables; you can often push the unit back into the dash cavity.

Open the front doors. Remove the plastic caps on the ends of the dashboard to reveal large bolts securing the dash to the A-pillars.