The TCR 1203 is part of the legendary . It features high-accuracy angle measurements (3") and PinPoint EDM technology for reflectorless measurements. Key Specifications: Angle Accuracy: 3" (1 mgon) EDM Range: Up to 3,500m to a single prism Reflectorless (R400): Up to 400m+ without a prism Display: Full-color touch screen with alphanumeric keyboard Storage: CompactFlash (CF) cards for easy data transfer 📍 Step 1: Physical Setup and Leveling Before powering on the unit, ensure the hardware is stable.
Always calibrate if the instrument has undergone a temperature change of more than 20°C.
This guide serves as a practical manual for setting up, operating, and maintaining your Leica TCR 1203 Total Station. 🛠️ Overview of the Leica TCR 1203
Follow the prompts to calibrate the and Tilting Axis .
Secure the TCR 1203 using the center fixing screw.
Measure from the ground point to the side mark on the TCR 1203.
Turn on the instrument. The Electronic Level (Tilt Sensor) will appear. Adjust the tribrach footscrews until the digital bubbles are centered. 🖥️ Step 2: Creating a Job
Press to measure and record, or F2 (DIST) then F3 (REC) . Stakeout (Finding Points) Go to Programs > Stakeout . Select the point you need to find from your list.
Extend legs equally and ensure the head is roughly level over your point.
The TCR 1203 is part of the legendary . It features high-accuracy angle measurements (3") and PinPoint EDM technology for reflectorless measurements. Key Specifications: Angle Accuracy: 3" (1 mgon) EDM Range: Up to 3,500m to a single prism Reflectorless (R400): Up to 400m+ without a prism Display: Full-color touch screen with alphanumeric keyboard Storage: CompactFlash (CF) cards for easy data transfer 📍 Step 1: Physical Setup and Leveling Before powering on the unit, ensure the hardware is stable.
Always calibrate if the instrument has undergone a temperature change of more than 20°C.
This guide serves as a practical manual for setting up, operating, and maintaining your Leica TCR 1203 Total Station. 🛠️ Overview of the Leica TCR 1203 Total Station Leica Tcr 1203 Manual
Follow the prompts to calibrate the and Tilting Axis .
Secure the TCR 1203 using the center fixing screw. The TCR 1203 is part of the legendary
Measure from the ground point to the side mark on the TCR 1203.
Turn on the instrument. The Electronic Level (Tilt Sensor) will appear. Adjust the tribrach footscrews until the digital bubbles are centered. 🖥️ Step 2: Creating a Job Always calibrate if the instrument has undergone a
Press to measure and record, or F2 (DIST) then F3 (REC) . Stakeout (Finding Points) Go to Programs > Stakeout . Select the point you need to find from your list.
Extend legs equally and ensure the head is roughly level over your point.
EN