Plug your cable directly into the motherboard (back of the PC) rather than a front-panel hub or external USB hub. 3. Configure QFIL Correctly
If the log says Finished Provide Programmer Name followed by a failure, it means the programmer was sent but the device didn't "acknowledge" it.
Try renaming the file to a simpler prog_emmc_firehose_8953.mbn and re-selecting it in your tool. Where to Find a Working Programmer? progemmcfirehose8953ddrmbn fix
If the programmer name contains "ddr," it signifies it is specifically configured to initialize the DDR RAM before flashing the system partitions. Common Causes of Failure
Using a USB 3.0 port (blue) often causes handshake timeouts with EDL mode. Plug your cable directly into the motherboard (back
Set this to eMMC (since the file name specifies "emmc").
Connect your phone in EDL mode. It should appear under as Qualcomm HS-USB QDLoader 9008 . Try renaming the file to a simpler prog_emmc_firehose_8953
The "Qualcomm HS-USB QDLoader 9008" driver is missing or corrupted.
Flashing firmware can wipe your data and carries a risk of hard-bricking your device. Always ensure your device battery is at least 30% charged before attempting a Firehose flash.