Pdf: Iso -16276-1 Patched

: It traditionally applies to steel substrates with a thickness of at least 10 mm . However, the updated ISO 16276-1:2025 edition expands this scope to include substrates as thin as 3 mm .

The standard, officially titled "Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 1: Pull-off testing" , is a critical benchmark for quality control in industrial coating applications.

: For many applications, a circular cutting tool is used to cut through the coating down to the substrate around the dolly to isolate the test area. pdf iso -16276-1

ISO 16276-1 is primarily designed for of protective paint coatings on steel structures.

ISO 16276-1: The Standard for Pull-Off Testing in Corrosion Protection : It traditionally applies to steel substrates with

: Users should note that pull-off testing is a destructive process . Areas tested will require repair once the test is completed, the extent of which depends on the project specification. 2. The Pull-Off Testing Procedure

The core of the standard is the , which measures the force required to detach a coating from its substrate. Core Steps in Testing : : For many applications, a circular cutting tool

: A suitable adhesive (typically a 2-pack epoxy or cyanoacrylate) is used to bond the dolly to the coating surface.

This standard provides a rigorous, standardized methodology for measuring the of protective coatings—a term that encompasses both adhesion (bond to the substrate) and cohesion (internal strength of the coating). 1. Scope and Application

: The coating and the face of the test cylinder ( dolly ) are cleaned and degreased.