Before connecting, ensure the area is well-ventilated. If the battery is inside a vehicle, turn off all electronics and remove the keys from the ignition. 2. Connecting the Charger
Connect to a heavy metal part of the engine block or chassis (away from the battery) if the battery is in the car. If the battery is out of the car, connect to the negative terminal (- or NEG). 3. Selecting the Charge Rate
The charger needs to "sense" at least 2 volts in the battery to begin the charging process. If your battery is at 0V, the charger may not activate. motomasterbatterycharger111567manual full
You are trying to charge a 6V battery (this unit is 12V only).
Coil the cables loosely to prevent internal wire breakage. Store in a cool, dry place. Frequently Asked Questions (FAQ) Before connecting, ensure the area is well-ventilated
Always connect the clamps before plugging the charger into the AC outlet to avoid sparks.
Compatible with Lead-Acid (Standard, AGM, Deep Cycle) Operating Instructions: Step-by-Step 1. Preparation Connecting the Charger Connect to a heavy metal
The green light indicates the battery has reached full capacity. The charger will automatically switch to a "float mode" to prevent overcharging.