If ozone concentration drops, check for a clogged inlet filter.
High-concentration yields, typically up to 20% by weight.
The chassis must be grounded to prevent static discharge. 🚀 Installation & Setup mks astron 2l manual
A small amount of Nitrogen (N2) or Carbon Dioxide (CO2) is often required (approx. 50–100 ppm) to stabilize the ozone production. ⚙️ Operation Guidelines To produce ozone, follow this sequence: Start Cooling: Turn on the water flow first.
Plug in the communication cable (RS-232, Profibus, or Analog) to your controller. 3. Gas Requirements Oxygen (99.99% purity or better). If ozone concentration drops, check for a clogged
Never exhaust ozone directly into the workspace; use an ozone destruct unit.
Ozone is a powerful oxidant. Before powering on the unit, ensure the following are in place: 🚀 Installation & Setup A small amount of
Run oxygen through the cell for 5 minutes to clear moisture.