Manual Alpina It 31015 May 2026

The refers to a petrol-powered chainsaw manufactured by the Italian brand Alpina (specifically from the Conegliano, Italy era). While this specific numeric code is often found on the air filter cover or identification plate of vintage and older models, the "manual" for this machine typically follows the standard operating procedures for Alpina's 2-stroke petrol engines. 1. Product Overview and Identification Alpina IT 31015

Check for carbon buildup and ensure the gap is set correctly (typically around 0.5mm to 0.6mm).

Once the engine "pops" or fires briefly, move the choke to the run position and pull again to start. 5. Maintenance and Troubleshooting To keep your Alpina IT 31015 Manual Alpina It 31015

The front hand guard acts as a manual and inertial chain brake. Ensure it is disengaged (pulled back toward the handle) before attempting to start the engine.

Always wear gloves, eye protection, and sturdy footwear. The refers to a petrol-powered chainsaw manufactured by

Ensure the chain is tight enough that it doesn't sag but can still be moved by hand.

For official digital copies of current manuals, you can visit the Alpina Garden Support Page and enter your specific SKU or product name. www.alpina-garden.comhttps://www.alpina-garden.com Petrol chainsaw - ACS 39 (14 - Alpina garden tractors Product Overview and Identification Alpina IT 31015 Check

Hold the machine firmly on the ground. Pull the starter rope slowly until you feel resistance, then give it a sharp, quick tug.

is a classic petrol engine chainsaw designed for domestic and light professional gardening tasks. 2-stroke petrol engine. Origin: Manufactured in Conegliano, Italy.

Use dedicated bar and chain oil in the separate reservoir to ensure the cutting system remains lubricated during use. 4. Starting Procedure Preparation: Fill both the fuel and chain oil tanks.