Lifetime Basketball Hoop Assembly Cb14500 [new] Link

Secure the pole braces to the base using the provided hardware, but only them for now to allow for adjustments. 2. Connect the Pole Sections

: Ensure the "lip" at the bottom of the pole faces away from the base.

It is easiest to assemble the backboard and rim while they are lying flat on the ground. Lifetime 48 Inch Crossover Basketball System Assembly lifetime basketball hoop assembly cb14500

: Deep-well sockets are highly recommended to speed up the process. Mallet or Hammer : Necessary for seating the pole sections.

: To protect the pole ends while hammering them together. Secure the pole braces to the base using

Start by attaching the wheels to the portable base . Slide the axle through the wheels and the base as shown in the Home Depot setup guide.

While the box may look intimidating, this guide breaks down the assembly into manageable steps. It is easiest to assemble the backboard and

: This is the most critical step. Slide the sections together and strike the end of the pole against a piece of scrap wood on the ground five to six times.