Key Programming - With Delphi Ds150e

Open the software and select the correct . For key programming, you usually need to navigate to the Multifunction or Immobilizer section rather than the standard Engine Diagnostic menu. 3. Accessing the Immobilizer

Programming "Keyless Go" or Proximity fobs on cars made after 2018 often requires online server access, which the DS150e does not support.

The DS150e usually "extract" or "read" this PIN from the ECU. key programming with delphi ds150e

While the Delphi DS150e is powerful, it is not a dedicated locksmith tool like a Zed-Full or an Autel IM608.

Always ensure your original key still works after the session. Most systems wipe all keys from memory the moment you start the "Learning" process, meaning you must re-program the old keys along with the new ones in the same session. Conclusion Open the software and select the correct

Always connect a battery maintainer to the car. If the voltage drops below 12V during programming, the procedure will fail, and the car may not start even with the original key.

You will need to find this PIN in the vehicle’s original paperwork (Car Pass) or use a separate PIN-reading tool before you can proceed. 5. Coding the Keys Once the PIN is accepted: The software will ask how many keys you wish to program. Always ensure your original key still works after

It excels at European brands (VW, Ford, Peugeot, Renault) but may have limited "Special Functions" for some Asian or very late-model American vehicles.

Most vehicles (especially those from the VAG group, PSA, or Opel/Vauxhall) require a to allow key learning.