Jte Inverter Manual - ~upd~

Mount the unit vertically with at least 150mm of clearance above/below and 50mm on the sides for heat dissipation.

Before mounting the device, ensure the environment meets these critical standards to prevent equipment damage or fire risks:

If the inverter encounters an issue, the display will flash a fault code. Regular inspection of motor insulation (minimum 5MΩ) is recommended to prevent secondary inverter damage. 用户手册 Jte Inverter Manual

For most JTE models, such as the , the control panel is used for initial configuration: Enter Programming: Press the PRGM key.

For safety, the inverter and motor must be well-grounded, as leakage current may exceed 3.5mA. 2. Wiring and Technical Specifications Mount the unit vertically with at least 150mm

Install on metal or other non-flammable surfaces. Ensure the support can hold at least four times the inverter’s weight.

Connect exclusively to the P+ and PB terminals. 用户手册 For most JTE models, such as the

Use MI1/MI2 for digital forward/reverse signals and AI1/AI2 for external potentiometer speed control. 3. Basic Programming and Operation

Maintain an ambient temperature between -10°C and 50°C. For altitudes above 1,000 meters, derate the output current by 1% for every 100 meters.

Set the primary speed adjustment method (e.g., keypad, digital setting, or analog input). Confirm: Press ENTER after modifying any value. 4. Troubleshooting and Maintenance