Jbl N7000 Schematic |work| Guide

Thread: Rebuilding a JBL N7000. Possible? - LANSING HERITAGE

The network contains two capacitors and two inductors . jbl n7000 schematic

The N7000 circuit is relatively simple, consisting of two "cells" designed to provide a 12 dB per octave rolloff on each side of the crossover point. Typically set at 7,000 Hz . Thread: Rebuilding a JBL N7000

Uses an inductor in series with the signal to roll off frequencies above 7 kHz for the midrange/woofer (like the JBL 375 driver). The N7000 circuit is relatively simple, consisting of

Most units feature a continuously variable ALPS level control or L-pad to adjust the tweeter output to match the room acoustics. Specifications and Compatibility

The N7000 was originally intended to bridge the gap between a 2-way system and a UHF driver to create a 3-way setup. LANSING HERITAGEhttps://www.audioheritage.org

Uses a capacitor in series with the signal to protect the tweeter from high currents below 7 kHz.