Foxconn Ml194v-0 Motherboard Manual [2021] May 2026

LGA 1155 (Supports 2nd and 3rd Generation Intel Core i3, i5, i7, and Pentium processors). Chipset: Intel H61.

4 x SATA 2.0 or 3.0 ports (depending on specific revision). I/O Panel: Standard VGA, USB 2.0/3.0, and Gigabit Ethernet. 2. BIOS and Jumper Settings

Move the jumper cap from pins 1-2 (Normal) to pins 2-3 (Clear) for 10 seconds while the PC is off. Return the cap to pins 1-2 before restarting. FOXCONN ML194V-0 MOTHERBOARD MANUAL

Below is a comprehensive technical guide based on standard specifications for this hardware. 1. Key Technical Specifications

2 x DDR3 DIMM slots (Supports up to 16GB of DDR3 1066/1333/1600 MHz RAM). Expansion: 1 x PCIe x16 (for dedicated graphics). 1 x PCIe x1 (for smaller expansion cards). LGA 1155 (Supports 2nd and 3rd Generation Intel

To reset BIOS settings to factory defaults, locate the 3-pin jumper near the battery.

The Foxconn ML194V-0 is typically a Micro-ATX or laptop-specific motherboard designed for mid-range systems of the early 2010s. I/O Panel: Standard VGA, USB 2

Finding a technical manual for a legacy board like the can be challenging because "94V-0" is actually a PCB flame-resistance rating, not the specific model name. However, this marking is commonly found on motherboards used in Sony VAIO and HP laptops/desktops, such as the Sony VAIO PCG-71211V and HP G62-A30ER .

If you are troubleshooting boot issues or hardware changes, these common Foxconn settings apply:

Press F2 or Delete repeatedly during the initial splash screen to enter the BIOS setup utility. 3. Drivers and Support ITX Series of Motherboards User Manual