Diagnostica Stago Start 4 Coagulation Analyzer Manual !!hot!! -

As a clot forms, the viscosity of the plasma increases.

The heart of the STart 4 is the . Unlike optical systems that can be affected by lipemic, icteric, or hemolyzed samples, the STart 4 uses a mechanical approach: diagnostica stago start 4 coagulation analyzer manual

Wipe down the incubation area with a mild disinfectant. Ensure no reagent spills have occurred in the measurement channels. Weekly: Check the pipette tip and tubing for clogs. As a clot forms, the viscosity of the plasma increases

The analyzer requires a warm-up period to reach 37°C. The "Temp" indicator will stabilize when ready. 2. Preparing Consumables Cuvettes: Use only Stago-certified cuvettes. Ensure no reagent spills have occurred in the

Before running tests, ensure the analyzer is placed on a level surface away from direct sunlight.

Verify the temperature of the incubation blocks using a certified thermometer to ensure it remains at 37°C (+/- 0.5°C). ⚠️ Troubleshooting Common Issues Error Message / Problem Potential Cause No Clot Detected Low fibrinogen or missing ball Check cuvette for metal ball; re-run sample. Temperature Fluctuation Room draft or faulty sensor Move away from AC vents; contact technical support. Pipette Sync Error Loose connection Check the RS232 or specialized pipette cable connection. 📋 Technical Specifications Measurement Channels: 4 independent channels.