Programming is managed via a backlit LCD and a menu-driven keypad.
The controller typically requires a 24 VDC incoming control cable. This power is often fed from a central LubeCon pumping station or an external power supply.
Utilize the "push-to-connect" terminal strips inside the unit for easy component installation. Ensure all proximity switches and solenoid valves are wired according to the specific schematic provided with your model. Programming Your Controller castrol lubecon advanced system controller manual
The ASC is a multi-channel unit that provides several advantages over standard lubricators:
Once programmed, the system must be purged to remove air from the capillary tubes. Put the controller in an "on cycle" and ensure the proximity switch detects the chain. This forces the central pump to prime the lines. Common Troubleshooting and Maintenance Programming is managed via a backlit LCD and
Password protection prevents unauthorized staff from changing critical timing or pressure settings. Installation & Wiring Essentials
Open the door panel and press the program button. If prompted, enter the authorized password to edit settings. Put the controller in an "on cycle" and
Turn the pumping station switch to "ON." The controller should display a continuous readout of the current channel status.