Caselabs Sma8 Manual Patched -

To assemble the frame from a flat-pack or stripped-down state, follow these steps: 1. Assemble the Base and Frame Lay the bottom chassis plate flat on a non-scratch surface.

Dedicated compartment for power supplies and heavy radiator configurations.

Requires removing the front 5.25-inch drive bay cages. Maintenance & Hardware Compatibility Tips caselabs sma8 manual

Up to 120mm of combined radiator and fan thickness. Bottom (Lower Chamber) Mount Format: Dual side-by-side mounts

The SMA8 was engineered to maximize radiator surface area. Use the mounting guidelines below to plan your loops: 120mm or 140mm wide Maximum Size: Up to 480mm (4x120mm) or 560mm (4x140mm) To assemble the frame from a flat-pack or

Push the tray in until it seats flush against the back panel.

Choose between the or Reverse (RTX) motherboard layout. Requires removing the front 5

Houses the motherboard tray, graphics cards, and primary reservoir mounts. Features a large acrylic or tempered glass side window.

Features a removable divider plate to isolate heat from the main chamber.