The Caraflo V200 is designed for simplicity. Unlike home showers, it is engineered to work efficiently with the limited water supply and lower pressure typical of mobile water systems. Turning the Shower On
If you haven’t used the shower in a while, turn the temperature dial to "Cold" and run the water until it flows steadily. This clears air locks.
Periodically unscrew the handset and soak it in a mild white vinegar and water solution for an hour. Use a soft brush to clear the rubber nozzles. Winterizing (Crucial Step!)
Unscrew the shower hose from the wall outlet and let it hang down to ensure no water is trapped in the "U" bend of the pipe.
Using the kitchen sink while someone is in the shower will cause a sudden drop in pressure and a spike in temperature.
The most common issue users face is "cycling" water temperatures. Because the V200 relies on your vehicle’s boiler (Truma, Alde, or Whale), follow these steps for a consistent experience:
If your water heater has a boost setting, activate it 15 minutes before showering to ensure you have a full tank of hot water ready. 3. Maintenance and Winterization
Leave the shower mixer in the "open" position throughout the winter storage period. 4. Troubleshooting Common Issues Likely Cause Low Pressure Clogged showerhead or weak pump. Descale the head; check if the pump filter is clear. Dripping Outlet Worn ceramic cartridge or O-ring.
Replace the internal cartridge (readily available at caravan centers). Air lock in the heater. Run the hot tap only until the "spluttering" stops. Leaking from Wall Loose connection behind the panel.
Master Your Mobile Shower: The Ultimate Caraflo V200 Operating Guide