Avery Berkel L130 Manual Patched May 2026

Can be panel-mounted using 4mm screws. Care must be taken not to over-tighten, as this can damage the case.

There are typically two primary documents available for the L130:

Requires a DC power supply (approx. 200mA) that is free of electrical noise and sudden transients. Avery Berkel L130 Manual

The L130 manual emphasizes specific environmental and electrical requirements to ensure the device’s and longevity:

A solid earth connection is mandatory, using the dedicated point on the rear of the device. Common Maintenance Tasks Calibration Can be panel-mounted using 4mm screws

Supports up to 10,000 divisions with a 24-bit Sigma Delta A/D converter for high precision.

Equipped with RS-232 and full-duplex RS-422/RS-485 serial outputs for connecting to printers, networks, or computers. 200mA) that is free of electrical noise and

Calibration is found under the menu. It typically requires a known reference weight (often 100kg or more for larger platforms). Technicians must navigate the "Build" and "Calibration" menus to set the zero point and span adjustment. Troubleshooting Errors