Before you begin, ensure you have a clean, shaded workspace. Heat can make the material too stretchy, while extreme cold makes it brittle. Philips and Flathead screwdrivers A heavy-duty staple gun (for base attachment) Contact cement or high-strength fabric adhesive Trim removal tools (to avoid scratching the paint) The ARTNJTHNKJPNN SW TCH Base Kit 2. Step-by-Step Installation Guide Phase A: Removing the Old Component
Never install a new top part during a rainstorm or in high humidity, as moisture can get trapped in the adhesive layers. artnjthnkjpnnswtchbasenspzipertopart install
Engage the zipper slider carefully. If it feels stuck, do not force it. Check if the NSP base is aligned straight. Before you begin, ensure you have a clean, shaded workspace
Ensure the non-slip base is flush against the frame. Even a 2mm gap can cause wind noise at highway speeds. 4. Maintenance Step-by-Step Installation Guide Phase A: Removing the Old
Start by partially retracting your roof. You want the tension to be low enough to work with, but the frame stable enough to hold its shape. Carefully unzip the existing top part and unscrew the retention clips along the SW TCH base. Use your trim tool to pry away any old adhesive or rusted staples.
Always start from the exact center and work your way out to the sides. This prevents "bunching" at the corners.
This is where the ARTNJTHNKJPNN system shines. The zipper is designed for high-tension environments.