Alcor Micro Unknown Fa00 F W Fa04 Work Page

Restart your computer. Windows will attempt to reinstall a fresh generic driver upon reboot. 2. Use Manufacturer-Specific Drivers

Generic Windows updates can sometimes cause Alcor devices to stall. If you are on a laptop, download the official OEM driver:

Before attempting complex firmware flashes, try a clean driver reset: Open (Win + X). Expand Universal Serial Bus controllers or Memory technology devices . Right-click the Alcorlink USB 2.0 Card Reader or the "Unknown Device" and select Uninstall device . alcor micro unknown fa00 f w fa04 work

If the device is a flash drive showing 0 bytes, you may need a Mass Production (MP) tool to "re-stitch" the firmware: Identify the exact controller using a tool like . Download the corresponding version of AlcorMP (e.g., AlcorMP 16.11.01.MD

Check the box to if available.

: Visit the HP Software and Driver Downloads page. Search for "Alcorlink Card Reader" under the Storage or Chipset category for your specific model.

Expand > USB selective suspend setting and set it to Disabled . Quick Troubleshooting Checklist Potential Solution 0 MB / No Media Use AlcorMP tool to reflash firmware. Yellow Warning ! Uninstall driver and restart. Not Detected Try a different USB port (preferably USB 2.0). Code 47 Physically unplug the device and plug it back in. Restart your computer

To get your device to work, you generally need to address a firmware identification error or a driver conflict. This specific combination of identifiers (FA00 controller with FA04 firmware) often appears when a USB flash drive or card reader is in a "stalled" state, showing 0 bytes or "No Media" in Windows. Understanding the Error

In the tool settings, try setting to "Low Level Format" and MP Mode to "Capacity Optimize". Warning : This process will erase all data on the device. 4. Disable USB Selective Suspend Right-click the Alcorlink USB 2